Epson C11C617121 - Stylus C88+ Color Inkjet Printer Інформація про продукт - Сторінка 8
Переглянути онлайн або завантажити pdf Інформація про продукт для Принтер Epson C11C617121 - Stylus C88+ Color Inkjet Printer. Epson C11C617121 - Stylus C88+ Color Inkjet Printer 11 сторінок. Epson stylus c88: quick reference
Також для Epson C11C617121 - Stylus C88+ Color Inkjet Printer: Технічні характеристики (2 сторінок), Посібник "Почніть тут (8 сторінок), Короткий посібник (44 сторінок)
Друкувати сторінку
Epson Stylus C88
5. Open the cartridge cover.
6. Squeeze the back tab of the empty/low cartridge and lift it
out of the printer. Don't take the used cartridge apart or try
to refill it.
Warning: If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water.
7. Before you remove the new cartridge from its package,
shake it four or five times. Then remove it from the
package.
Caution: Do not remove
or tear the label on the
cartridge; otherwise ink
will leak.
Don't touch the green
chip on the front of the
cartridge; you may inhibit
normal operation and
printing.
8. Lower the cartridge into the holder and push it down until
it clicks into place.
8
Epson Stylus C88
-
Don't touch
the green part
9. If you need to replace other ink cartridges, repeat steps 6
through 8 before continuing with step 10.
10. Close the ink cartridge cover and make sure you hear it click
into place.
11. Close the printer cover.
12. Press the
ink button. The printer begins charging the ink
delivery system.
The green
power light flashes and the printer makes
noise. Charging takes about 1 minute. When it's finished,
the green
power light stops flashing and stays on, and the
red
light goes out.
Caution: Never turn off the printer while the green
light is flashing, or you'll waste ink.
Note: If the red
light stays on (not flashing), the ink cartridge
may not be installed correctly. Press the
reinstall the ink cartridge until it clicks into place.
Aligning the Print Head
If your printouts look blurry or grainy, or you see light or dark
vertical banding, you may need to align the print head.
Note: Banding may also occur if your cartridges are low on ink or you
need to clean the print head.
1. Turn on the printer.
2. Load several sheets of paper.
3. Windows: Right-click the
(in the lower right corner of your screen). Select
.
Alignment
Note: If you don't see the icon, go to your printer properties
window, click the Maintenance tab, then select Print Head
Alignment.
Macintosh OS X: Open the
double-click the
Epson Printer Utility
in the printer list, click
Stylus C88
Print Head Alignment
6/05
power
ink button again and
printer icon on your taskbar
Print Head
folder and
Applications
icon. Select
, and select
OK
.