Aybey Elektronik CLT Посібник з програмування та встановлення - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з програмування та встановлення для Монітор Aybey Elektronik CLT. Aybey Elektronik CLT 5 сторінок. Custom design lcd display board

Друкувати сторінку

GENERAL FEATURES

CLC/CLT/CLP is a custom-design Vertical RGB LCD display system designed to use for Lift cabin

and landing push-buttons. It needs 12-24V DC supply. CLC and CLT get all information from

CANBUs. CLC is used for fault tolerant applications and CLT is used for high speed applications.

CLP board can be applied up to 64 stops with 6 gray-code, binary code inputs as M0,...,M5 or counter

systems inputs as M0, 817, 818 and 7-Segment inputs. It also includes 6 signal inputs as 31 (Down

Arrow), 32 (Up Arrow), FIRE (Fire), 12 (Busy), 39 (Inspection) and SD (Out Of Service).

Galvanically isolated inputs can be driven by positive or negative voltage. Reverse of input voltage is

selected from common terminals COM1 and COM2.

Full character screen and related graphical symbols are shown below:

After initialization, software version number and ID (in CLC) is displayed first. Then inputs are

evaluated and related character(s) are displayed according to stored settings. If no input is connected

or all connected inputs are passive then stop 0 character(s) are displayed. (In 7-Segment Mode if no

input is connected or connection is wrong then no character displays; if no communication established

in CANBus mode, then "CE" displays)

When signal input(s) are activated or serial communication established then related symbol is

displayed on left side. Floor information signal inputs drive 2 digit characters, indicating floor

information. For floor indicating displays, all capital letters, numbers, - sign in dot-matrix segments

format can be chosen as left and right digit for up to 64 floors.

F/7.5.5.02.87 R:2

CLC / CLP