Aybey Elektronik SYT Посібник з програмування та встановлення - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з програмування та встановлення для Монітор Aybey Elektronik SYT. Aybey Elektronik SYT 4 сторінки. Custom design rgb lcd display board

Друкувати сторінку

PROGRAMMING

On board, there are 3 buttons named as INC (↑), DEC (↓) and ENT. ENT button is used to enter and

exit to/from programming mode, to approve and to save settings. INC (↑) and DEC (↓) buttons are

used to increase and decrease current value and move up and down in menu.

FLOOR DISPLAY SETTINGS

Push and hold ENT button a few second to enter programming mode where arrows and busy icon

always blink to distinguish it from normal mode. Floor number blinks to set and you can change floor

number with INC (↑) and DEC (↓) buttons. Then with ENT button, right display and left display can

be set.

This display shows upper menu of Floor 0 (bottom floor). To edit Floor 0 display data, push ENT

shortly and enter sub-menu.

Here right char blinks. Now it can be changed by pushing INC (↑) and DEC (↓) buttons. Any number

or letter can be chosen. After selecting right char push ENT shortly and left char starts to blink. In the

same way left char is set.

After setting all floor displays push and hold ENT button a few seconds, then all setting are saved into

permanent memory. At any step of programming it is possible to save changes and exit in the same

way. Now display turns to normal mode and shows current floor info.

F/7.5.5.02.93 R:1

SYC / SYT/SYP