FHC GLENDALE GLENF5 Посібник зі швидкого встановлення

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Сантехніка для ванної кімнати FHC GLENDALE GLENF5. FHC GLENDALE GLENF5 2 сторінки. Shower hinge template, wall mount hinge - factory set 5 degree offset full back plate

Друкувати сторінку
SHOWER HINGE TEMPLATE
GLENDALE
Wall Mount Hinge - Factory Set
5 Degree Offset Full Back Plate
ITEM NO. GLENF5
SPECIFICATIONS
SPECIFICATIONS
Glass Sizes:
3/8" to 1/2" (10 mm to12 mm) Tempered Glass Only
Construction:
Solid Brass with HD Stainless Steel Back Plate
Closing Type:
Self-Centering When Within 15 Degrees of Closed Position
Cutout Required:
Cutout No. SD1
Includes:
Hinge body, glazing gaskets, wall mounting screws, allen
head/phillips head cover plate screws, and fabrication template.
Use:
Residential Bath and Commercial Hotel Applications
GASKET SPECIFICATIONS:
For 3/8" (10mm) Glass: Use One Thick Gasket On Each Side
For 1/2" (12mm) Glass: Use One Thin Gasket On Each Side
GLASS INSTRUCTIONS:
Only use tempered safety glass. To prevent damage to the hinge finish
during installation, do not use power tools when installing these hinges.
IMPORTANT INFORMATION:
The Glendale Series Hinge comes factory set to allow an additional
5 degrees of closing for jobs that require a firmer positive position
against a jamb or seal.
3/8" (10 mm) GLASS
MAXIMUM DOOR
CAPACITY
WEIGHT
USING 2 HINGES
80 LBS. (36 kg)
28" (711 mm)
USING 3 HINGES
120 LBS. (54 kg)
32" (813 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
FRAMELESS HARDWARE COMPANY
1/2" (12 mm) GLASS
WIDTH
WEIGHT
WIDTH
80 LBS. (36 kg)
28" (711 mm)
120 LBS. (54 kg)
32" (813 mm)
P.O. Box 1906, South Gate, CA 90280
2"
50 mm)
3-1/2"
(89 mm)
2-3/16"
(56 mm)
CARE & CLEANING GUIDELINES:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware.
Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will
become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
GLEN037 Glendale Wall Mount Hinge - Full Back Plate
MAINTENANCE:
FHC's hinges come factory greased for a silent, hassle-free experience.
If there is any noticeable squeaking that occurs after installation it is recommended
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning
grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge
is disassembled during maintenance, use a small amount of white lithium grease
to lubricate the interior hinge components.
Toll Free: (888) 295-4531 | Fax: (323) 336-8307 | Web: fhc-usa.com
PROFESSIONAL GRADE
28"
28"
MAX
MAX
WIDTH
WIDTH
2-HINGES
2-HINGES
MAX
MAX
80
80
3-1/2"
LBS
LBS
(89 mm)
SEE TEMPLATE ON BACK
SEE TEMPLATE ON BACK
Refer to Dimensions Shown
Refer to Dimensions Shown
to Ensure Accuracy
to Ensure Accuracy
7/16"
(11 mm)
EXPERIENCE AND INNOVATION
32"
32"
MAX
MAX
WIDTH
WIDTH
3-HINGES
3-HINGES
MAX
MAX
120
120
LBS
LBS
LIT0001F 12.10.19 PG 1 OF 2