ARCHIPELAGO LIGHTING LEMX Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Освітлювальне обладнання ARCHIPELAGO LIGHTING LEMX. ARCHIPELAGO LIGHTING LEMX 5 сторінок.

Друкувати сторінку
LEMX - Installation Guide
Side Mount: LEMX-Sx
1. Using a flat screwdriver, open the front cover, remove
and discard the canopy kit.
2. Feed excess wires into the junction box.
3. The system can accept input voltages of 120 VAC
or 277 VAC. Therefore connect the black/red wire (line
voltage) and the white wire (neutral) leads to the building
utility. Connect the green ground.
4. Using the junction box screws to mont spider plate
onto junction box.
5. Insert the canopy onto the location where the mounting
hole cover was removed.
6. Mount the unit securely to the canopy.
7. Snap the EXIT plate to the unit.
5.
|
Headquarters: 4615 State Street, Montclair, CA 91763
|
Production Center: 7345 Syncamore Canyon Blvd, Riverside, CA 92508
1.
2, 3.
6.
4.
7.
archipelagolighting.com
+1(866) 912-3220