CREE LIGHTING LEDway Tunnel Інструкція з розбирання - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з розбирання для Зовнішнє освітлення CREE LIGHTING LEDway Tunnel. CREE LIGHTING LEDway Tunnel 3 сторінки. Street lights
Друкувати сторінкуDisassembly Instructions
Power Supply (PS)
For End User (EU)
For control Auhority (CA)
N° DOC: DI114RLER0 Rev: 00
13
7
15
8
9
14
10
11
12
PS-EU
a.Access the wiring compartment by opening the appro-
priate clips 6
b.Disconnect the socket from the plug of connectors 7
on the LED bar cables
c.Unplug from terminal block socket 8 to disconnect the
general power supply
d.Unscrew the earth screw 9 paying attention to the not-
ched washers
e.Unscrew screw 10 that secures metal plate 11 on door
12
f. Remove the wiring plate 11 with the components on
board: driver 13, module 14 and surge protector 15
g.Replace the old wiring plate with a new one
h.Screw 10 on plate 11 and door 12 via a torque of 2.5
Nm, restoring the cable ties to lock the cables
i. Screw 9 back on plate 11 and door 12 by reapplying
the notched washers, using a torque of 2.5 Nm
j. Reconnect the LED bar cables and the outgoing cable
on connector 7 and terminal block 8 of driver 13 (see
attached wiring diagrams)
k.Close the door by hanging up the appropriate clips 6
6
PS-CA
A.Follow points "a-b" of paragraph PS-EU
B.Unscrew the screws that attach driver 13 to plate 11
C.Extract driver 13
D.Detach module 14 from plate 11
E.Unscrew the screws that attach module 15 to plate 11
Latest release date: 19/11/2021