CREE LIGHTING VSL Series Інструкція з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Зовнішнє освітлення CREE LIGHTING VSL Series. CREE LIGHTING VSL Series 2 сторінки. Led streetlight

Друкувати сторінку
Reminder
We appreciate your purchase!
Please read the instruction manual before installation and keep it for future reference.
Warning
1. To avoid damage, falling, electric shock or fire, please do not modify the lamp or replace accessories without
confirming with the supplier first.
2. Please authorize only qualified personnel to install the lamp and ensure they follow the instruction manual.
Any improper installation might cause falling, electric shock, fire, or other injury, damage or hazard.
3. Please disconnect power before installation or any maintenance of the lamp.
4. Please disconnect power if it begins to smoke or emit odors, since fire or electric shock may occur. Ask a
qualified person to inspect and maintain the luminaire.
5. Please do not dismantle the lamp without the supplier's authorization.
6. Please do not touch the power supply when the lamp is operating.
7. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by the supplier,
a service agent or qualified person.
8. Terminal block not included. The electrical fitting must be installed by a licensed electrician.
9. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent
or a similar qualified person.
10. Only to be installed outside arms reach.
11. For use in environments where an accumulation of non-conductive dust on the luminaire may be expected.
12.Mounting heights of lights not higher than 15m.
13.The luminaire shall be positioned so that prolonged staring into the luminaire at a distance closer than X
(see table below) meter is not expected.
Optics
Insulation:
LV Supply vs
Version
CONTROL CONDUCTORS
DOUBLE
A (30W)
DOUBLE
B5 (50W)
DOUBLE
B (80W)
C (120W)
DOUBLE
D (150W)
DOUBLE
Caution risk of electric shock
Technical Parameters
Product
30W
50W
80W
Specifications
Outlook
680x282x160mm
Dimensions
Luminaire
6.5±0.5kg
6.8±0.5kg
Net Weight
Working
-30°C to + 40°C (INPUT POWER A, B,B5, C)
Temperature
Storing
-40°C to +70°C
Temperature
Installation Instructions
Pole Mount (Adjustable Angle)
Physical Dimensions(Unit:mm)
∅66
15°
15°
15°
M10x16
A
120W
150W
763x352x167mm
8.7±0.5kg
8.9±0.5kg
6
-30°C to + 35°C (INPUT POWER D)
763
680
15°
1
1
8
B
M8x25
Connect wires as reque ted
2
1
A
2
L
Non-
Dimmable
N
DIM+
DIM-
B
1
2
2
L
brown
black
yellow/green
green
N
blue
white
DIM+
DIM-
L
Non-
Dimmable
DIM+
N
DIM-
1
2
L
brown
black
N
blue
white
DIM+
DIM-
1
8
2
L
N
1-10V /DALI
1-10V
CLASS I
Dimmable
Dimmable
1
2
L
brown
black
N
blue
white
yellow/green
green
black
red
gray
brown
L
1-10V / DALI
1-10V
N
CLASS II
Dimmable
Dimmable
1
2
L
brown
black
N
blue
white
black
red
gray
brown