CREE LIGHTING IG Series Інструкція з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Інструкція з монтажу для Ліхтар CREE LIGHTING IG Series. CREE LIGHTING IG Series 4 сторінки. Wireless led parking luminaire

Друкувати сторінку

Pendant Mounting

Plate

STEP 6:

After wiring connections have been made,

tuck all wires into the water shield ensuring

that no wires are pinched.

NOTE: Ensure that splices are contained

within Water Shield for future splice

inspections.

STEP 7:

Attach luminaire to the Pendant Mounting

Plate by engaging the tabs on the Pendant

Mounting Plate with the slots on the

luminaire. Rotate until tabs lock securely. See

Figure 6.

NOTE: May require extra pressure on

Pendant Mounting Plate to engage luminaire

tabs into slots.

STEP 8:

Install a minimum of (2) supplied screws

into the pendant mounting plate tabs on the

underside of the luminaire. See Figure 6.

STEP 9:

Cut off any excess length of leads from the

top of the customer supplied pendant kit.

STEP 10:

Make wiring connections to customer

supplied junction box per "Electrical

Connections" section.

STEP 11:

Using customer supplied hardware, attach

pendant kit and luminaire to customer

supplied junction box.

3 of 4

(4) Tabs

(4) Luminaire Slots

SYSTEM COMMISSIONING AND

CUSTOMIZING

System commissioning is required for the

fixtures to be recognized on the Simply SNAP

network. Contact Cree Lighting at 800-236-

6800 for more details about commissioning

and customization.

EMERGENCY LIGHTING CONTROLS

If luminaire is provided with 2 ELCD leads

in the junction box and Emergency Lighting

bypass control is needed, please contact

Cree Lighting at 800-236-6800 for detailed

instructions.

LED LUMINAIRE MAINTENANCE

CLEANING INSTRUCTIONS:

Regular cleaning of the light LED luminaire is

required to keep the LED luminaire operating

optimal optical performance.

•

Cleaning intervals to be no more than

twelve months for IESNA Clean category

environments and more frequently for

dirtier conditions.

•

Care should be taken as to not damage

the lens and/or the interior reflective

surface as these components are critical

for optimal performance.

•

Do not use any type of cleaners or stiff

brushes on the LED luminaire. Use water

with mild detergent and soft cloth.

View of Underneath

Luminaire

Slots

FCC NOTICE

CAUTION: Changes or modifications not

expressly approved could void your authority

to use this equipment.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not cause

harmful interference, and (2) this device must

accept any interference received, including

interference that may cause undesired

operation.

This equipment has been tested and found

to comply with the limits for a Class A

digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to

provide reasonable protection against

harmful interference when the equipment is

operated in a commercial environment. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instruction

manual, may cause harmful interference

to radio communications. Operation of this

equipment in a residential area is likely to

cause harmful interference in which case

the user will be required to correct the

interference at his own expense.

CAN ICES-005 (A)/NMB-005 (A)

The following statement applies to all part

numbers ending in -ENC:

RF EXPOSURE NOTICE

To comply with the FCC/IC RF exposure

compliance requirements, this device and its

antenna must not be co-located or operating

to conjunction with any other antenna or

transmitter. This equipment should be

installed and operated with minium distance

5cm between the radiator & your body. No

other antenna is authorized for use with this

product.

(2) Screws

(4) Pendant

Mounting

Plate Tabs

LPN00305X0012A0_A