ARCHITETTURA SONORA SHARK-SUB Посібник
Переглянути онлайн або завантажити pdf Посібник для Сабвуфер ARCHITETTURA SONORA SHARK-SUB. ARCHITETTURA SONORA SHARK-SUB 2 сторінки.
Друкувати сторінку
SHARK_SUB
1283
Unpacking:
to remove the Shark from the shipping box carefully follow these steps
1.
Lay the box on a counter that makes
unpacking comfortable and proceed to
open the box.
Installation:
the Shark_Sub loudspeaker can be installed either indoor and outdoor, on wall, on ceiling or between tree
branches; to x the module use the appropriate mechanic and shown in the images.
In the case you decide to use the metal tube xing option, insert the steel tube into its seat connected to the ball
joint till it stops, then block the tube tightening the two miniscrews, making sure to lock them into the proper
holes on the tube. Proceed according to the different anchoring options like shown below.
Connection to the body
2.
Gently lift the module, which is rmly
kept safe into the box by its packaging,
and remove the molded foam.
Connection to the ceiling - Indoor - (VPERG anchoring)
SOUND OUTPUT
Speaker type
2 x 6" woofer
Nominal impedence
4
Crossover
no crossover on board - DSP
needed (HP 35 Hz 12dB/oct
min; LP 120 Hz 12 dB/oct min)
Frequency range
38-150 Hz (-6dB)
Sensitivity (1W-1m)
90 dB
Speaker Max Power
600W
Speaker RMS Power
300W
500W (Class D)
3.
Remove carefully the module from the
protective plastic envelope and proceed
to installation.
Connection to the wall
Indoor/Outdoor - (FK-12 clamp)
SPECIFICATIONS
Material
composite material available in
black or white
Mechanic material
stainless steel
Dimensions
1283 x 310 x 285 mm
Weight
11 kg