Creek Audio EVOLUTION 50A Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Підсилювач Creek Audio EVOLUTION 50A. Creek Audio EVOLUTION 50A 13 сторінок. Integrated amplifier
Також для Creek Audio EVOLUTION 50A: Інструкція користувача (8 сторінок), Інструкція з експлуатації (17 сторінок)
Друкувати сторінку
Technical Specifications:
Power output @ 1% THD
Power output @ 1% THD
Continuous output current
Peak output current, burst into 0.5 Ohms
THD and Noise, 2/3 rated power 8 Ohms
Signal to Noise
Frequency Response
Gain at 1 kHz Un-balanced
Gain at 1 kHz Balanced
Input sensitivity, Line level
Maximum input voltage, RCA and Balanced (XLR)
Crosstalk
DC offset
Pre-Amp Inputs
Plug-in Phono options
Power amp inputs
Tuner option
Remote IN jack
Remote OUT jack
Loudspeaker Outputs
Output impedance
Headphone Output
Mains voltage
Front panel finish options
Power Consumption: Idle, Max, Standby
Weight
net
Size W/H/D
inc. feet and knobs
Page: 10
>55 Watts into 8 Ohms, both channels driven
>85 Watts into 4 Ohms, both channels driven
>8.5A (sine wave)
+/-26 Amps
< 0.005%
102dBA Line input
<10Hz to >100 kHz +/-2dB (LINE)
<10Hz to >50 kHz +/-2dB (Balanced)
33.3dB (x 46)
27.0dB (x 22.5)
410mV
5.4V and 10.8V r.m.s.
-80dB at 1 kHz
< +/-10mV
4 x RCA un-balanced, including optional
Sequel Phono plug-in PCB
Input 1 changes to Phono with Sequel Phono fitted.
Gain: 40, 48 or 54dB
Inputs 3 & 4 can be assigned as
Power Amp direct inputs
AMBIT FM/AM tuner module (optional extra)
Powered output for external IR sensor or
Serial connection to Evo products
Serial connection to other Evo system components
1 pair of binding posts for use with Spade Lugs
4mm plugs or bare wire
<0.1 Ohms at 1 KHz and 8 Ohms
1 x 6.3mm with Low impedance output (<50 Ohms)
230/115V 50/60Hz, switchable
Silver or Black
<20 Watts, 350 Watt, No standby
7.5kgs (16.5 lbs)
430 x 60 x 280mm (17 x 2.3 x 11")