DigiGrid DiGiGrid Q Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Підсилювач DigiGrid DiGiGrid Q. DigiGrid DiGiGrid Q 18 сторінок.

Manual Device Configuration

SoundGrid QRec

SoundGrid Studio

Certain SoundGrid hosts—including SoundGrid Studio, eMotion LV1 or SuperRack SoundGrid—offer an Auto-

Config tool. Once your devices are connected and powered up, click Auto Config to start the configuration.

Auto-config chooses the correct LAN port on the host computer and scans the SoundGrid network for devices. It

then patches the devices to the host. We recommend that you let Auto-Config take care of things, at least when you

are getting started. If later you add, remove, or swap a device; Auto-Config will reconfigure your inventory and re-

patch.

Note that SoundGrid Studio assigns the SoundGrid driver automatically. SuperRack SoundGrid and eMotion LV1 require

that the SoundGrid ASIO/Core Audio driver is assigned manually.

You can assign, remove, and manage a device manually. Click on the plus or arrow

symbol in a device slot to open the Device Menu, then select a device.

Any device not already used will be available for assignment. If no other devices are

assigned, the current device will become your clock master. Drivers and servers are

assigned in the same manner.

See the user guide of your host system for specific instructions on device

assignment and I/O channel patching.

DiGiGrid Q / User Guide