Digilent NetFPGA-SUME Довідковий посібник
Переглянути онлайн або завантажити pdf Довідковий посібник для Материнська плата Digilent NetFPGA-SUME. Digilent NetFPGA-SUME 20 сторінок.
NetFPGA-SUME™ Reference Manual
Revised April 11, 2016
This manual applies to the NetFPGA-SUME rev. C
Overview
Powered by Xilinx's Virtex-7 XC7V690T
FPGA, the NetFPGA-SUME is an ideal
platform for high-performance and
high-density networking design.
32 GTH serial transceivers have been
used to provide access to 8 lanes of
end-point PCI-E (Gen3 x8), 4 SFP+
(10Gbps) ports, 2 SATA-III ports
(6Gbps), and 18 data-rate-adjustable
GTH ports through a HPC-FMC
connector and a QTH connector.
Wide high-speed memory interfaces in the form of three 72 MBit QDRII+ SRAMs with 36 bit buses and two 4GB
DDR3 SODIMMs with 64 bit buses provide an ideal memory solution for common networking applications.
Features include:
FPGA
Xilinx Virtex-7 XC7V690T FFG1761-3
Memory
Two 4GB DDR3 SODIMMs (MT8KTF51264Hz-
1G9E1)
64 bit wide buses clocked at
850 MHz (1700 mbps)
Three 72Mbit QDRII+ SRAMs
(CY7C25652KV18-500BZXC)
36 bit wide buses clocked at
500 MHz (1000 mbps)
Storage
Two SATA III ports (6 gbps via GTH
transceivers)
Micro-SD Card Slot
Two 512Mbit Micron StrataFlash parallel flash
modules (PC28F512G18A)
For bitfile storage only
Communication Interfaces
PCI-E Gen3 x8 supporting 8Gbps/lane
Four SFP+ interfaces supporting 10Gbps
Four globally unique MAC addresses
USB-UART
I2C Pmod port
DOC#: 502-301
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
The NetFPGA-SUME board.
Expansion Connectors
QTH Connector (8 GTH transceivers)
One HPC FMC Connector (10 GTH transceivers
and 68 User I/Os)
One 12-pin Pmod port (8 User I/Os)
Programming
Micro USB Connector for JTAG programming and
debugging (shared with USB-UART interface)
Xilinx CPLD XC2C512 for FPGA configuration from
parallel flash
Power Management
Two Linear Technology Power System Managers
(LTC2974)
Provide current measuring on all major
power rails
Other Features
User LEDs and Push Buttons
PROG Push Button for manual FPGA Reset
FPGA Configuration LEDs
I2C Mux (PCA9548A) for controlling all onboard
I2C buses
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
Page 1 of 18