Digilin Focus 48 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Освітлювальне обладнання Digilin Focus 48. Digilin Focus 48 3 сторінки. Led lighting profile

Друкувати сторінку
Focus 48 - LED Lighting Profile
Installation Guide
Extrusion interconnects
1.
Remove all covers
4.
Align extrusions together
7.
Re-install gear tray, making cable
interconnects, as necessary.
Note: Drivers should not be covered. Drivers rely on convection air flow for cooling and covering them may cause them to enter thermal regulation.
For any technical information relating to the connection of these luminaires to dimming systems, refer to LED products at
digilin.com.au
+617 3899 1267
2.
Remove gear trays
5.
Slide internal keys ways across 50/50 into each
extrusion.
8.
Re-install cover
3.
Loosen keyways
6.
Re-tighten Keyways.
www.digilin.com.au
Page 3 of 3