Digilin FLR Посібник з монтажу

Переглянути онлайн або завантажити pdf Посібник з монтажу для Зовнішнє освітлення Digilin FLR. Digilin FLR 3 сторінки. Wall wash uplight

Flare – Wall Wash Uplight

Installation Guide

Notes

Installation should only be performed by a qualified professional

•

Install in accordance with all appropriate wiring standards

•

DALI is not SELV and needs to be wired accordingly

•

Never connect a LED fitting to a driver that is powered. Doing so may result in damage to the LED.

•

Always make sure the output voltage range and output current of the LED driver match the requirements of the

•

LED fitting. Failure to do so may result in damage both the driver and fitting.

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

•

similar qualified person.

Do not install under mechanical stress.

•

Allow for expansion due to changes in temperature.

•

Please be aware that while the system has a very long operational life, faults may still occur, and provision needs to be made for maintenance.

•

Always turn off power before working on fitting.

•

Specifications

Dimensions

Weight

Cut out Size

IP Rating

Wiring Diagram

Non-Dim

Dimmable

digilin.com.au

+617 3899 1267

U n i t s

Ø75 x 81

640

Document Rev: 6.0 - 25 January 2022

Product specifications are subject to change without notice

Page 1 of 3