Digilock numeris aspire Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Клавіатура Digilock numeris aspire. Digilock numeris aspire 11 сторінок. Touch rfid latch mechanism
Також для Digilock numeris aspire: Посібник з монтажу (16 сторінок), Посібник з експлуатації (6 сторінок)
Друкувати сторінку
Setup
Locks are shipped with factory default settings (only operates by pressing
Key and Manager Keys.
1
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn on.
Programming Instructions
Express Register Manager Keys
The Programming Key can quickly program multiple locks to operate with the same Manager Keys.
1
Go to a lock already programmed to operate with the Manager Keys.
Press
= ` 6 1 `
The LED will turn on.
3
Insert the Programming Key to program each lock to operate with
the same Manager Keys.
Two sets of two-tone beeps will be heard and the LED will flash
twice to indicate successful programming.
*The Programming Key will continue to function in express registration mode until it is used to operate a lock.
2
2
Insert one Manager Key at a
time.
A beep will be heard for each
Manager Key programmed.
.
Product Guide
Standard Keypad
Bolt Mechanism
). Each lock must be setup to operate with a Programming
= `
3
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
2
Insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
4a
End express registration mode.*
Go to any programmed lock.
Press
then insert the Programming Key.
= `
Press
then insert the Programming Key again to return the
= `
bolt to the original position.
Shared & Assigned Use Functionality
4
Repeat above steps for each
lock or follow instructions to
Express Register Manager Keys
to setup all locks.
4b