Digilock DL310 Інструкція користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція користувача для За замками Digilock DL310. Digilock DL310 6 сторінок. Digital lock
Друкувати сторінку3.3. Add Code Users
3.31 Prior to adding the Code User:
3.311. Write down the User Group. (001-200)
3.312. Write down the Guest Code. (4-8 digits)
3.313. User group corresponds to the guest code.
Several guest codes cannot be set under one group.
Identical guest codes cannot be used with different groups.
Operating instructions
1 Press "#" to start the lock
2 Input the
"Master
3 Within ten seconds (before the indicator light
switches off) input "01" then "#"
4 Within ten seconds input
(Group No. can't be reused.)
5 Within ten seconds, input the"
"#"
6 Press "#" two times.
7 Wait 15 seconds, or press "#", to exit.
Under this mode, use the Guest Code to open the door directly.
Opening the door:
Operating instructions
1
Input
"Guest
2
After 5 seconds
3.5. Add TM Key Users
3.51 Prior to adding the TM Key User:
3.511 Write down the User Group, (001-200)
3.512 Prepare the TM Key.
3.513 User group corresponds to the TM Key.
Several guest TM Keys cannot be set under one group.
The same TM Key cannot be used with different groups.
Operating instructions
1 Press "#" to start the lock
2 Input the
"Master
3 Within ten seconds (before the indicator light
switches off) input "01" then "#"
4 Within ten seconds (before the indicator light
switches off) input
No. can't be reused.)
5 Within ten seconds indicator light switches off,
get the
"TM
Code" then "#"
"Group
Guest
Code" then "#"
Code" then "#"
"Group
No." then "#" (Group
Key" close to the inductive area,
Lock status
"Beeps" twice, keypad lights up, blue light
flashes.
Lock status as above
Lock status as above
No." then "#"
Lock status as above
Code" then
Lock status as above
First "#" "Beeps" two times, status as above
Second "#" "Beeps" three times, Guest Code
User adding is complete.
Long "Beep" indicator light switches off.
Lock status
Keypad lights up, blue unlock indicator light, with one "Beep"
Lock motor activates, turn the handle to open
"Beeps" twice, red light flashes twice, door locks, indicator light
switches off.
Lock status
"Beeps" twice, keypad lights up, and the blue
light flashes.
Lock status as above
Lock status as above
Lock status as above
Lock status as above
Page2