Digilock Curve Keypad Basic Посібник з інсталяції - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з інсталяції для Rfid системи Digilock Curve Keypad Basic. Digilock Curve Keypad Basic 13 сторінок. Deadlatch/deadbolt motorized rear

Друкувати сторінку

LOCK INSTALLATION STEPS

For illustration, a keypad front unit with a bolt rear unit is shown�
2
Rear View
Insert the front unit screw posts through the doors mounting holes.
3
Rear View
Hold the front unit against the front of the door. Use the rear unit mounting holes as a guide, then slide the front and rear units together.
Make sure the connector pins align properly with the connector.
If properly connected, a triple beep will be heard and the LED will flash three times.
Note:
Mounting hardware requires a torque level of:
4
Rear View
Make sure the connector pins align properly with the connector.
If properly connected, a triple beep will be heard and the LED will flash three times.
11
I NSTALL GU ID E
Keypad & RFID | Basic & Advanced
21.4 kgf/cm² ±20%
for hand or powered tools to insure proper lock functionality.
Front View
Front View
Front View