AccuScreens ELECTRIC SCREEN Інструкція з експлуатації Посібник з експлуатації - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Кріплення для телевізора AccuScreens ELECTRIC SCREEN. AccuScreens ELECTRIC SCREEN 12 сторінок. Automatic/electric wall/ceiling projection screens—110-120v ac
Також для AccuScreens ELECTRIC SCREEN: Інструкція з експлуатації Посібник з експлуатації (8 сторінок)
Друкувати сторінку
CARE OF SCREENS
1. Examine surface to be sure it
is free of insects, dirt or foreign
matter before rolling into case.
2. Screen may be operated as
frequently as necessary but
should not be run up and down
continuously. To do so will
cause the motor to overheat
and thermal overload to cut out;
it will be necessary to wait for
the motor to cool sufficiently to
resume operation.
3. Motor does not require any
lubrication.
TO LOWER SCREEN SURFACE
Press lower end of slide switch.
Screen will stop in the "DOWN"
position automatically.
TO RAISE SCREEN SURFACE
Press upper end of slide switch.
Screen will stop in the "UP" posi-
tion automatically.
TO STOP SCREEN
Screen may be stopped in any
intermediate position by position-
ing slide switch to center "OFF"
position.
NOTE: It is suggested that when
screen is not in use, the slide
switch should be positioned in the
center "OFF" position.
HANGING BRACKET
(Optional at extra cost)
NO. 6 WALL BRACKET
Non-adjustable per-
mits screen to extend
6" from wall.
NO. 11 WALL BRACKET
Non-adjustable per-
mits screen to extend
10" or 14" from wall.
3-POSITION SWITCH
Complete with cable, is stan-
dard with the electric screen.
2