Accusound AC-AMA-2 Посібник - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник для Підсилювач Accusound AC-AMA-2. Accusound AC-AMA-2 8 сторінок. Acoustic amplifier

each channel from zero to max. The large Red knob, Effects Select, allows any

one of the 16 types of reverberation to be selected. There is a list of the reverb

styles associated with each number on the back of the amplifier. The Red

knobs, one on each side, allow the level of reverberation to be adjusted that is

applied to each channel. The smaller Red knob below the Effects Select knob

called Effects Parameter allows adjustment of one characteristic of each

individual reverberation. The parameter that is adjustable is indicated in the

next table, but it can be such characteristics as reverberation decay time, chorus

depth, flanger rate etc

Master Level Control:

The Master Level control, situated

at the bottom right of the amplifier

panel, controls the overall output

level of the amplifier. This control

should be used at any level to

produce the required output level.

Treble/Mid/Bass:

These yellow knobs provide 3

bands of tone control. Turning any

knob anti-clockwise will reduce the

level of that band, Treble, Mid or

Bass, rotating it clockwise increases

the level in that band. Note that

increasing these controls could

cause overload, if this happens

simply reduce the level by

decreasing the Level using the

White knobs at the top of the

panel.

Reverberation:

There are 16 different types of

reverberation available on each

channel. It has to be the same type

of reverberation on each channel

but the level of this reverberation

can be adjusted individually on