Diginet LEDsmart+ MMDM RT Посібник - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник для Диммер. Diginet LEDsmart+ MMDM RT. Diginet LEDsmart+ MMDM RT 12 сторінок. Setup functions

G: Setting Toggle / Memory

Step 1

Enter into the dimmer Setup Mode - See PART A

Step 2

Click the dimmer rotary shaft 7 times

Step 3

LED will blink 7 times

If the memory dimmer function is currently Disabled, lamp(s) connected to

the dimmer will now turn OFF

b. If the memory dimmer function is currently Enabled, lamps(s) connected

to the dimmer will now turn ON

Note: To cancel/exit do nothing for 30 seconds

Note: If more than one dimmer is connected to the same load, all dimmers connected

to this load will now blink 7 times

Step 4

To Enable the memory dimmer adjust the dial Clockwise until the lamp(s) turns ON

To Disable the memory dimmer (Default) adjust the dial Anti-clockwise until the lamp(s)

turns OFF

Note: To cancel/exit do nothing for 30 seconds

Step 5

Click once to save & exit

Note: If more than one LEDsmart

brightness levels only needs to be set in one device. The setting is automatically saved

to all other devices connected in parallel

device is connected in parallel, the minimum

Setup Functions - Rotary Dimmer/Switch