Diginet DGOZ-TCSW-LR35 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Системи управління Diginet DGOZ-TCSW-LR35. Diginet DGOZ-TCSW-LR35 8 сторінок. Lcd touch switch. wall mounted control interface for the rapix lighting control system

Друкувати сторінку

Installation and wiring

Installation

The LCD Touch Switch is designed to be mounted using standard electrical mounting accessories. For

example, a Clipsal® 154 mounting bracket or 157 wall box, as shown below.

Mounting Bracket

Examples of typical standard electrical mounting accessories suitable for mounting the LCD Touch Switch

The LCD Touch Switch can be installed as follows

Install the LCD Touch Switch Back Plate on the wall using an appropriate mounting accessory

•

Connect the RJ-45 on the supplied adaptor cable into the rear of the front LCD Touch Switch

•

module (see wiring section below)

The front LCD Touch Switch assembly can then be clipped into the Back Plate

•

LCD Touch Switch

One Gang Wall Box

Page | 3