Diginet RAPIX eHub Посібник з монтажу - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник з монтажу для Системи управління Diginet RAPIX eHub. Diginet RAPIX eHub 16 сторінок. Lighting control system

Друкувати сторінку

RAPIX Lighting Control System

16. Connecting occupancy sensors to the eHub

The following occupancy sensors can be connected and powered from one of the two eHub sensor inputs.

Manufacture

Gerard Lighting

Sensor Switch

A sensor patch lead is provided with the above sensors and connected to the eHub as shown below.

17. Connecting a dry contact input

Item Number

Description

Diginet DGEMS360CL

Smart Scan PIR Sensor, 360 degree ceiling

mount, recessed

CM-PDT-9-AU

Sensor Switch dual technology sensor with PIR

and Microphonics detection, ceiling mounted

The eHub includes two separate dry contact inputs for

connecting contact closure outputs signals from 3

party devices into the eHub. Typical connections are

shown on this diagram.

The maximum cable length between the eHub and the

switch input is 50m.

RAPIX Lighting Control System - eHub