Cisco 200E Series Посібник із швидкого старту - Сторінка 10
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Cisco 200E Series. Cisco 200E Series 13 сторінок. Advanced smart switches
Друкувати сторінкуBack Panel
Console—The Console port is where you can connect a serial cable to a
computer serial port to configure the switch by using a terminal emulation
program.
Power—The Power port is where you connect the switch to power.
Returning the Device to the Factory
5
Default Settings
To use the
Reset
the following:
• To reboot the advanced smart switch, press the
than 10 seconds.
• To restore the advanced smart switch configuration to the factory
default settings:
1. Disconnect the advanced smart switch from the network or disable
all DHCP servers on your network.
2. With the power on, press-and-hold the
10 seconds.
10
button to reboot or reset the advanced smart switch, do
Reset
Reset
button for more than
200E Series Advanced Smart Switches
button for less