Cisco 200E Series Посібник із швидкого старту - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Cisco 200E Series. Cisco 200E Series 13 сторінок. Advanced smart switches

Друкувати сторінку

1. Quick Start Guide

Welcome

Thank you for choosing the Cisco 200E series Advanced Smart Switch, a

Cisco Small Business network communications device. This device is

designed to be operational right out of the box as a standard bridge. In the

default configuration, it will forward packets between connecting devices

after power up.

Package Contents

• Cisco SF200E-24/P or SF200E-48/P Advanced Smart Switch

• Rackmount Kit

• Power Cord or Power Adapter

• This Quick Start Guide

• Product CD

• Serial Cable

• Rubber Feet

This guide will familiarize you with the layout of the advanced smart switch

and describe how to deploy the device in your network. For additional

information, see www.cisco.com/smb.

Mounting the Cisco Switch

There are two ways to physically install the switch:

• Set the switch on a flat surface.

• Mount the switch in a standard rack (1 rack unit high).

Do not deploy the device in a location where any of the following

conditions exist:

High Ambient Temperature—The ambient temperature must not

exceed 104 degrees Fahrenheit (40 degrees Centigrade).

Reduced Air Flow—Both side panels must be unobstructed to prevent

overheating.

Mechanical Overloading—The device should be level, stable, and

secure to prevent it from sliding or shifting out of position.

Circuit Overloading—Adding the device to the power outlet must not

overload that circuit.

200E Series Advanced Smart Switches