Digiop NVR-FlexVR 3U Посібник з експлуатації апаратного забезпечення - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник з експлуатації апаратного забезпечення для ВІДЕОРЕЄСТРАТОР Digiop NVR-FlexVR 3U. Digiop NVR-FlexVR 3U 4 сторінки. Video and data management systems
Друкувати сторінкуBack View
Back Panel
Charging USB
* DVI-I port with a DVI to VGA adapter can connect to a VGA monitor.
** Using the DisplayPort for video may require an optional adapter to connect to older monitors which only support VGA and/or DVI. When connecting to
a DisplayPort monitor or adapter, multi-monitor capability of the system is not available during boot or when running DOS. Output will be limited to the
DisplayPort monitor only. When the system is booted to Windows and the graphics driver is loaded, multi-monitor support will be fully functional.
Expansion Cards
The Di32 series chassis has no expansion cards.
The DM32 series chassis has one expansion card: Video capture card with CH 1 - 16 in and Spot out 1, 2.
DH16 Series Expansion Cards
Spot out
Ch 9 - 16 in
Ch 1 - 8 in
Video capture card
Sensor and Control,
RS485 Terminals
Back panel
Intel® AMT port
ports (2)
1394 port
e-SATA port
USB 2.0 ports (2)
RS485
TX+
TX–
RX+
RX–
Audio capture card:
Upper: Ch 9 - 16 in
Lower: Ch 1 - 8 in
Expansion cards
Power On / Off switch
DVI-I* monitor port
DisplayPort**
DVI-D monitor
port
Spot out
Control 1
(Ch 1 - 16)
Control 2
Control 3
Spot out
Control 4
(Ch 25 - 32)
Ground
Sensor 1
Ch 25 - 32 in
Sensor 2
Sensor 3
Sensor 4
Ch 9 - 16 in
Ground
Ch 17 - 24 in
Ch 1 - 8 in
www.digiop.com
Power cable connector
Ethernet RJ-45 port
Line-in,
Line-out,
Mic-in
connectors
USB 3.0 (SS) ports (2)
DH32 Series Expansion Cards
Video capture cards
Sensor and Control,
RS485 Terminals
Control 1
Control 2
Control 3
Control 4
Ground
Sensor 1
Sensor 2
Sensor 3
Sensor 4
Ground
RS485:
TX+
TX–
RX+
RX–
Audio capture card:
Upper: Ch 9 - 16 in
Lower: Ch 1 - 8 in
3