Cisco 2950SX 48 SI - Catalyst Switch Технічний паспорт - Сторінка 3

Переглянути онлайн або завантажити pdf Технічний паспорт для Перемикач Cisco 2950SX 48 SI - Catalyst Switch. Cisco 2950SX 48 SI - Catalyst Switch 15 сторінок. Catalyst 2950 series switches

Друкувати сторінку

These switches provide customers with many connectivity and port-density options. The Cisco Catalyst 2950-12

and Cisco Catalyst 2950-24 switches provide 12 and 24 10/100-Mbps ports, respectively, for edge connectivity.

Depending on port-density requirements, customers with gigabit ﬁber uplink connectivity needs can choose between

the Cisco Catalyst 2950SX-24 Switch, which provides 24 10/100-Mbps ports and 2 integrated 1000BASE-SX ports,

and the Cisco Catalyst 2950SX-48 Switch, which provides 48 10/100-Mbps ports and 2 integrated 1000BASE-SX

ports.

With these integrated ports, customers get an extremely cost-effective solution for delivering gigabit speeds using

ﬁber. These switches are ideal for education and government segments where ﬁber uplinks are required. For

customers that do not need ﬁber connectivity, the Cisco Catalyst 2950T-48 Switch with 48 10/100-Mbps ports and

two integrated 10/100/1000 BASE-T ports is a cost-effective alternative. The 10/100/1000 BASE-T ports can be used

for server connectivity or for uplink connectivity to distribution or other switches. Dual ports also provide

redundancy and increased availability, as well as provide a cost-effective means for cascading switches and managing

them as a cluster. The Cisco Catalyst 2950 Series Intelligent Ethernet switches with Enhanced Image software are

ﬁxed-conﬁguration models that bring intelligent services, such as advanced QoS, enhanced security, and high

availability to the network edge while maintaining the simplicity of traditional LAN switching. Combining a

Cisco Catalyst 2950 Series Intelligent Ethernet Switch with a Cisco Catalyst 3550 Series Switch enables IP routing

from the edge to the core of the network. Refer to the Cisco Catalyst 2950 Series Enhanced Image Data Sheet for

more information:

http://www.cisco.com/en/US/partner/products/hw/switches/ps628/products_data_sheet09186a00801a0c5b.html

Network Availability with Wire-Speed Performance in Connecting End Stations

to the LAN

With a switching fabric of 13.6 Gbps and a maximum forwarding bandwidth of 13.6 Gbps, Cisco Catalyst 2950

Series switches deliver wire-speed performance on all ports in connecting end stations and users to the company

LAN. Cisco Catalyst 2950 Series switches with basic services support performance-boosting features such as Cisco

Fast EtherChannel

to provide high-performance bandwidth between Cisco Catalyst switches, routers, and servers.

Network Security

Cisco Catalyst 2950 Series switches offer enhanced data security through a wide range of security features. These

features allow customers to provide network security based on users or MAC addresses. The security enhancements

are available free by downloading the latest software for the Cisco Catalyst 2950 Series switches.

Private VLAN Edge isolates ports on a switch, ensuring that trafﬁc travels directly from the entry point to the

aggregation device through a virtual path and cannot be directed to another port. In addition, for authentication

of users with a TACACS+ or a RADIUS server, 802.1x provides port-level security. Simple Network Management

Protocol Version 3 (SNMPv3) (non-crypto) monitors and controls network devices as well as manages

conﬁgurations, performance, collection of statistics, and security.

With the Cisco Catalyst 2950SX-48, 2950T-48, 2950SX-24, 2950-24, and 2950-12 switches, network managers can

make ports and consoles highly secure. MAC-address-based port-level security prevents unauthorized stations from

accessing the switch. Multilevel access security on the switch console and the Web management interface prevents

unauthorized users from accessing or altering switch conﬁgurations and can be implemented using an internal user

database on each switch or a centrally administered TACACS+ or RADIUS server. Using 802.1x in conjunction with

Cisco Systems, Inc.

Page 3 of 15