BYECOLD HH0606L Інструкція з експлуатації - Сторінка 7

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Обігрівач BYECOLD HH0606L. BYECOLD HH0606L 10 сторінок. Infrared heater panel with led light

Друкувати сторінку

temperature, thermostat will send ON commands to panel to turn on heating

function.

3. The screen display shows the setting temperature as well as the measured

temperature, time, date, modes etc.

4. The thermostat has week programmable、temperature setting、auto-off when

temperature jump、favorite temperature 、time setting functions etc.

5. It is powered by 4pcs of 1.5V AAA batteries. Please change with new ones if the

battery symbol gets flashing, or else it will not be able to control the panel.

6. Keypad locking function is designed to prevent the children from misusing.

7. LCD screen powered off means only the panel heating power off, the remote

control itself is still under working state until batteries dead/out or broken.

8. The LCD screen only can work in temperature range from 1°C ~ 50°C.

Operation Instructions of Heating Function

Pair the thermostat with the heating device

Plug the panel into power socket, press ON/OFF for thermostat, then press

button °C/°F and MODE buttons at same time to pair the thermostat with panel

until a long beep sound heard.

NOTE:

1) Pairing should be finished within 1 minute, or else you need to re-power on the

device.

2) Please re-power on the panel if you want to pair the device with another

thermostat.

3) One thermostat can be paired to and work with several panels at same time.

4) Before pairing please do power off those panels which you don't want to pair.

Set the Time and Day

It is essential that the clock time and day are set accurately if you require your

programmed events to start on time.

Step 1. Press and hold TIME button for 3 seconds until the Year of date flashing.

Step 2. Use ▲ or ▼ button to set the Year, then short press TIME to save and

proceed with setting up Month/Day/Hours/Minutes in similar manner.

Step 3. Short press TIME button again to save and exit.

Manually turn the thermostat ON/OFF

Press ON/OFF button to turn the thermostat on/off.

When thermostat is turned Off, the LCD will only display current room

temperature reading.

When thermostat is turned On, users can press ▲ or ▼ button to increase or

decrease the set temperature. If the set temperature is below room

temperature, heating device is now OFF. If the set temperature is above room

temperature, the thermostat goes ON and heating symbol

screen of thermostat, it is now supplying power to heating device.

Lock the buttons

Press and hold the LOCK button for 3 seconds until you see a lock icon

appearing. To unlock, repeat the steps above.

°C/°F Display

Short press the C/F button to convert Celsius/Fahrenheit or Fahrenheit/Celsius.

FAV Function

Press and hold FAV for 3 seconds until the set temperature icon flashes, press

UP and DOWN to set a favorite temperature, short press FAV to confirm.

In daily use, set temperature will convert to favorite temperature when short

press FAV button, and it will convert again to week target temperature at the

time when TIMER ON start to work.

5+2 or 1...7 Programming Mode

Press the MODE and TIME buttons simultaneously to select 5+2 or 1...7

programming modes.

Turns programming mode ON/OFF

Press and hold the MODE buttons for 3 seconds until you see ON appearing. To

turn OFF, repeat the steps above.

How to Programme Your Thermostat？

Press and hold the SET button for 3-5 seconds to enter into programming mode.

Note: Programming mode has a time-out limit whereby if no buttons are pressed

within 3-5seconds, it reverts back to the main screen.

1) 5+2 Programming Mode

You can program the thermostat to fit your lifestyle — week and weekend, plus

up to 4 groups of time interval per day.

- 5 -

appears on the