Cisco 5509 - Catalyst Chassis Switch Посібник з монтажу - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Cisco 5509 - Catalyst Chassis Switch. Cisco 5509 - Catalyst Chassis Switch 34 сторінки. Wireless controller
Також для Cisco 5509 - Catalyst Chassis Switch: Посібник зі швидкого встановлення (17 сторінок)
Друкувати сторінку
Installing the Chassis
The controller ships with rack mounting brackets and the desktop or shelf mounting rubber feet in a
separate bag.
An adjustable rack-mount kit is included for mounting the controller in a standard 19-inch (48.3 cm)
equipment rack. A standard equipment rack has two unobstructed outer posts, a minimum depth between
the front and rear mounting posts of 13 inches (33 cm), and a maximum depth of 32 inches (81.3 cm).
You can also install the controller in a 2-post equipment rack.
This kit is not suitable for racks with obstructions (such as a power strip) that could impair access to
system components.
Figure 3
Figure 3
1
2
3
4
The following sections cover the different installation options:
•
•
•
•
78-18998-01
shows the contents of the mounting kit.
Mounting Kit
1
4
Front brackets (2)
Rear bracket adapters (2)
Short slide-mount brackets (2)
Long slide-mount brackets (2)
Installing the Controller on a Desktop or Shelf, page 12
Installing the Controller in a 4-Post Rack, page 12
Installing the Controller in a 2-Post Rack—Flush Mount, page 16
Installing the Controller in a 2-Post Rack—Mid-Mount, page 18
2
5
12-24 x 0.75 in pan head screws (8)
6
10-32 x 0.75 in pan head screws (8)
7
M4x0.7 x 8mm flat head screws (6)
8
M3x0.5 x 6mm flat head screws (6)
Cisco 5500 Series Wireless Controller Installation Guide
Unpacking and Installing the Controller
3
8
7
6
5
11