Cisco 5509 - Catalyst Chassis Switch Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Перемикач Cisco 5509 - Catalyst Chassis Switch. Cisco 5509 - Catalyst Chassis Switch 34 сторінки. Wireless controller
Також для Cisco 5509 - Catalyst Chassis Switch: Посібник зі швидкого встановлення (17 сторінок)
Друкувати сторінку
Controller Overview
Figure 1
1
1
2
3
4
5
1. You can use only one console port (either RJ-45 or mini-USB). When you connect to one console port, the other is disabled.
Console Port Connections
The controller has both EIA/TIA-232 asynchronous (RJ-45) and USB 5-pin mini Type B, 2.0 compliant
serial console ports. The default parameters for the console ports are 9600 baud, 8 data bits, 1 stop bit,
and no parity. The console ports do not support hardware flow control.
EIA/TIA-232
Depending on the cable and the adapter used, this port appears as a DTE or DCE device at the end of the
cable. Only one port can be used at a time.
USB Console
The USB console port connects directly to the USB connector of a PC using a USB Type A to 5-pin mini
Type B cable.
For operation with Microsoft Windows, the Cisco Windows USB Console Driver must be installed on
any PC connected to the console port. If it is not installed, prompts guide you through a simple
installation process.
For information about downloading the latest Cisco Windows USB Console Driver, refer to the
Note
Release Notes for Cisco Wireless LAN Controllers and Lightweight Access Points for Release 6.0.
Cisco 5500 Series Wireless Controller Installation Guide
4
Front Panel
3
4
5
2
Cisco 5500 Series Wireless Controller
RP SP
USB0 USB1
EN
EN
3
4
5
6
7
1
2
7
8
Redundant port (RP) for future use (RJ-45) 6
Service port (RJ-45)
1
Console port (RJ-45)
USB ports 0 and 1 (Type A)
Console port (Mini USB Type B)
See the
"USB Console" section on page 4
Console Port" section on page 22
6
Model 5508
8
PS1 PS2 SYS ALM
9
10
SFP distribution ports
7
Management port LEDs
8
SFP distribution port Link and Activity LEDs
Power supply (PS1 and PS2), System (SYS), and
9
Alarm (ALM) LEDs
1
10 Expansion module (EM) slot
for information on the USB console port. See the
section for information about connecting the console port.
"Connecting the Controller's
78-18998-01