Cisco 5509 - Catalyst Chassis Switch Посібник зі швидкого встановлення - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Перемикач Cisco 5509 - Catalyst Chassis Switch. Cisco 5509 - Catalyst Chassis Switch 17 сторінок. Wireless controller
Також для Cisco 5509 - Catalyst Chassis Switch: Посібник з монтажу (34 сторінок)
Друкувати сторінку
1
Prepare for Installation
Note: This Quick Installation Guide is intended for experienced installers. For detailed
hardware installation instructions, refer to the Catalyst 5000 Series Installation Guide and the
Catalyst 5000 Series Module Installation Guide.
1
Check the packing slip to ensure that all the proper components are present.
2
Ensure the site is set up properly:
• Prepare equipment racks
• Ensure the environment is within specification
• Prepare network connections
3
Obtain the following equipment:
• ESD grounding strap and antistatic mat
• Numbers 1 and 2 Phillips screwdrivers and 3/16-inch flat blade screwdriver
• Tape measure and level
4
Ensure your safety when installing the Catalyst 5509 switch:
2
• Lift the chassis safely
• Cooperate with the natural laws of electricity
• Ensure that the power service at your site is suitable for the chassis you are
5
Take steps to prevent ESD damage to electronic
components:
• Use an ESD wrist strap when handling
• Handle modules by the edges only
• Place modules in a static shielding bag
connecting
modules or coming into contact with
internal components (see figure)
when not installed
o
AC
FAN
OUTPUT
OK
OK
FAIL
AC
FAN
OUTPUT
OK
OK
FAIL