Crest Audio CPL 6+ Посібник з експлуатації - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Спікери Crest Audio CPL 6+. Crest Audio CPL 6+ 16 сторінок. Passive 2-way loudspeaker system

Друкувати сторінку

CAUTION

Before attempting to suspend this speaker, consult with a certified structural engineer. Speaker can fall from

improper suspension, resulting in serious injury and property damage. Do not suspend or mount any other

product or device from this enclosure! Use only the correct mating hardware. All associated rigging is the

responsibility of others. Maximum enclosure angle 30 degrees.

Whenever possible, in addition to the nominal primary mounting method, use a suitable safety chain or wire rope

attached to one of the other groups of fly point inserts, and firmly attached to a suitable structural member as

indicated by a certified structural engineer.

We recommend the use of thread-locker at the insert point bolts, so the bolts cannot vibrate loose. Never

transport the cabinet using the array bracket or other mounting brackets as a structural member, while the cabinet

is mounted on an array bracket or other mounting bracket and unsupported otherwise, as this may unduly stress

the mounting inserts.

This Crest Audio loudspeaker should be suspended overhead only in accordance with the procedures and

limitations specified in the User's Manual and possible manual update notices. This system should be suspended

with certified rigging hardware by an authorized rigging professional and in compliance with local, provincial or

national suspension ordinances.

INSTALLATION

A total of nine (9) M8 1.25 mm per thread threaded mounting suspension points (2 top, 2 bottom, 2 left, 2 right,

and 1 rear) are provided. These are plugged with a hex key beveled head bolts.

The nine mounting suspension points are for use with forged shoulder machinery eyebolts and should be an M8

size, 1.25 mm per thread, and must conform to at least DIN 580 or ASTM A489, or whatever local, provincial or

national suspension ordinances or regulations may additionally require. Eyebolts must be used at a minimum as

a pair, never use just one eyebolt to hang the speaker overhead.

An additional set of four (4) M6 threaded mounting suspension points are provided at the rear center of the

cabinet for the optional Peavey Versamount 35 ceiling or wall-mount bracket.

WARNING

The CPL 6 + passive 2-way loudspeaker system is very efficient and powerful! This sound system can permanently

damage hearing! Use extreme care setting the overall maximum loudness!

The apparent sound level of the CPL 6 + can be deceiving due to its clear, clean sound output. The lack of

distortion or obvious distress can make the sound level seem much lower than it actually is. This system is capable

of sound pressure levels (SPL) in excess of 117 dB at 1 meter from the speaker!

SAFETY