Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску - Сторінка 11

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач Cisco AP776A - Nexus Converged Network Switch 5020. Cisco AP776A - Nexus Converged Network Switch 5020 26 сторінок. Cisco nexus 5000 series release notes release 4.1(3)n1(1) (ol-16601-01 h0, july 2009)
Також для Cisco AP776A - Nexus Converged Network Switch 5020: Примітка до випуску (48 сторінок), Примітка до випуску (44 сторінок), Примітка до випуску (26 сторінок), Примітка до випуску (22 сторінок), Короткий довідник (14 сторінок), Примітка до випуску (3 сторінок)

Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
OL-16601-01
CSCsx60187
Symptom: Configure duplicate IP address for multiple SVI interfaces.
Workaround: Do not configure two or more SVIs with the same IP address.
CSCsx80279
Symptom: When traffic is sent at line rate as a single burst, all addresses are not learned when egress
interfaces are FEX facing ports. This problem does not occur if sustained traffic is sent for more than
0.4 seconds.
Workaround: Resending the unlearned MAC addresses would render them relearned.
CSCsy99816
Symptom: When a Cisco Nexus 2000 Fabric Extender is already online and a fabric interface that is
not part of a port channel is configured with a serial number that does not match that of the FEX,
the fabric interface will be brought down, and show interface fex does not display the reason for
being down.
Workaround: None. This is a display issue.
CSCsy02439
Symptom: Under some circumstances, the FC MAC driver displays the following error message:
%KERN-3-SYSTEM_MSG: FCP_ERRFCP_PORT: gat_fcp_isr_ip_fcmac_sync_intr@424, jiffies =
0x1c422:Unknown intr src_id 41 - kernel
The error message is when an unused interrupt in the MAC fires. The error message does not
indicate any functional problem.
Workaround: None
CSCta78541
Symptom:
VSH crashes and generate a core when you do the following:
attach fex 102
show system error-id list
The Cisco Nexus 2000 Fabric Extender does not reload and the core does not impact the
functionality of the Fabric Extender.
Workaround: None
CSCta74119
Symptom: DCBX fails to converge between a Nexus 5000 switch running 4.1(3)N1(1) and another
Nexus 5000 switch running a 4.0(1a)N based release. As a result, priority-flow-control does not
work on this link.
Workaround: None.
CSCta85268
Symptom: When you downgrade from release 4.1(3)N1(1) to 4.0(1a)N-based releases using Fabric
Manager or when you upgrade from a 4.0(1a)N-based release to 4.1(3)N1(1) using Fabric Manager
error messages such as the following are generated:
2009 Jul 19 15:32:55 N5K-C snmpd: SNMP Operation (GET) timed out. reqId
(1448314586) errno (62) on iso.3.6.1.4.1.9.9.360.1.1.4.2.0
2009 Jul 19 15:32:56 N5K-C snmpd: SNMP Operation (GET) failed. Reason:13 reqId
(1448314586) errno (0) error index (1)
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, Release 4.1(3)N1(1)
Caveats
11