Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску - Сторінка 25

Переглянути онлайн або завантажити pdf Примітка до випуску для Перемикач Cisco AP776A - Nexus Converged Network Switch 5020. Cisco AP776A - Nexus Converged Network Switch 5020 26 сторінок. Cisco nexus 5000 series release notes release 4.1(3)n1(1) (ol-16601-01 h0, july 2009)
Також для Cisco AP776A - Nexus Converged Network Switch 5020: Примітка до випуску (48 сторінок), Примітка до випуску (44 сторінок), Примітка до випуску (26 сторінок), Примітка до випуску (22 сторінок), Короткий довідник (14 сторінок), Примітка до випуску (3 сторінок)

Cisco AP776A - Nexus Converged Network Switch 5020 Примітка до випуску
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Resolved Caveats—Cisco NX-OS Release 4.0(0)N1(1a)
This section lists the resolved caveats for this release.
Resolved Caveats—Cisco NX-OS Release 4.0(0)N1(1)
This was the first release of Cisco NX-OS for Nexus 5000 Series switches. There are no resolved caveats
for this release.
OL-16601-01
CSCsq39683
Symptom: Fibre Channel links with traffic running on it might generate syslog errors such as the
following:
2008 May 21 15:08:55 switch %KERN-3-SYSTEM_MSG: FCP_ERRFCP_PORT:
gat_fcp_isr_process_blk_intr@1441, jiffies = 0xb1cec:ISR threshold reached, reg_block
= 0x8, num_regs = 6, idx = 0, src_bit = 11 - kernel
There is no loss in functionality and these messages can be ignored.
Workaround: None.
CSCso83662
Symptom: One global MAC address is used in all STP and PVRST frames originating on various
ports. This can result in inconsistent MAC moves on peer switches connected with multiple links.
Workaround: None.
CSCsq53614
Symptom: Ethernet port channels configured between two Cisco Nexus 5000Series switches cause
a memory leak in the DCBX process. This leak eventually leads to the DCBX process crashing and
a system reboot (in a few days). This issue occurs only with Ethernet port channels between Cisco
Nexus 5000 Series switches. Port channels using the Catalyst 6500 Series switches do not have this
problem.
Workaround: Disable receive and transmit Link Layer Discovery Protocol (LLDP) on the port
channel members by entering the following configuration under each Ethernet interface that is a
member of the port channel:
Interface Ethernet 1/1
no lldp receive
no lldp transmit
CSCsq36609
Symptom: For a virtual Ethernet or virtual Fibre Channel interface configured as a SPAN source,
changing the interface administrative state results in a memory leak. Deleting and adding SPAN
sessions also causes memory leaks. The memory leaks eventually cause a switch reboot.
Workaround: Avoid using virtual Ethernet and virtual Fibre Channel interfaces as SPAN sources.
Avoid deleting and adding SPAN sessions.
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, Release 4.1(3)N1(1)
Caveats
25