Cisco BTS 10200 Softswitch Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Перемикач Cisco BTS 10200 Softswitch. Cisco BTS 10200 Softswitch 29 сторінок. T.38 fax relay

Друкувати сторінку

Cisco BTS 10200 Softswitch T.38 Fax Relay

Prerequisites

The T.38 Fax Relay feature requires that the following prerequisites be completed prior to sending or

receiving fax transmissions:

•

Configuration Tasks

The T.38 Fax Relay feature requires that the following configuration tasks be completed prior to sending

or receiving fax transmissions. Each task in the list is identified as either required or optional.

•

See the

Command Reference

This section documents new or modified Cisco BTS 10200 Softswitch commands associated with the

T.38 Fax Relay feature. All other commands used with this feature are documented in the Cisco BTS

10200 Softswitch Release 3.2/3.3 Command Reference Guide or in the Cisco user documentation for the

gateway(s) you are using.

New Commands

There are no new commands associated with the T.38 Fax Relay feature.

Modified Commands

This section documents modified commands associated with the T.38 Fax Relay feature.

H.323 Gateway

The H.323 Gateway (h323-gw) table defines the capabilities of each H.323 protocol gateway. There can

be four instances of an H.323 gateway running on the Call Agent at any one time.

Table Name: H323-GW

Table Containment Area: Call Agent

Command Types

Show, add, change, and delete

Examples

•

(to be supplied)

Configure the H.323 Gateway

Configure the H.323 Trunk Group profile

Configure the Media Gateway profile

"Command Reference"

show h323-gw [email protected];

add h323-gw [email protected]; fax-relay-cap=t38-ca-fax;

section for configuration examples.

Cisco BTS 10200 Softswitch T.38 Fax Relay Support

Prerequisites