Accustic Arts CD-PLAYER I (MK 3) Інструкція з експлуатації - Сторінка 14

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Підсилювач Accustic Arts CD-PLAYER I (MK 3). Accustic Arts CD-PLAYER I (MK 3) 14 сторінок.
Також для Accustic Arts CD-PLAYER I (MK 3): Інструкція з експлуатації (10 сторінок)

Друкувати сторінку

Malfunction

Playback of the CD is bad or is continuously interrupted

Cause 1

Due to finger prints the CD is badly soiled, therefore the error correction has to interfere

all the time or the error on the CD cannot be corrected.

Solution

Clean the CD carefully with a soft cloth

Cause 2

The CD is damaged due to scratches or other surface damage and therefore the error

correction has to interfere all the time or the error on the CD cannot be corrected.

Solution

If the scratches on the CD are not too deep, then they can be removed by using a special

polish for discs. If the scratches are deep, quite often a restoration is not possible.

For malfunctions which affect the reproduction relating to individual devices first of all make sure that all

connections are correctly and thoroughly made. In general, errors which arise are often a result of an

unsatisfactory or wrongly-made connection.

9 Specifications (selection)

Analog outputs:

Digital outputs:

D/A converter:

Distortion factor (THD+N):

Dynamic:

Crosstalk:

Signal-to-noise ratio:

Dimensions :

Weight:

1 x XLR (balanced – 2 x 620 )

1 x RCA (unbalanced – 100 )

1 x AES/EBU; XLR (balanced – 110 )

1 x S/P-DIF; RCA (unbalanced – 75 )

24 Bit / 192 kHz Upsampling technology

0.0016 %

120 dB

> 101 dB

- 103 dB

110 x 482 x 375 mm / 4.1 x 19 x 14.8 inches (H x W x D)

16 kg / 35 lbs.

VII-11