Accustic Arts MONO III MK2 Посібник - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник для Підсилювач Accustic Arts MONO III MK2. Accustic Arts MONO III MK2 13 сторінок.

Друкувати сторінку

8 Specifications

Inputs:

Input impedance:

Output:

Minimum loudspeaker impedance:

Voltage gain:

Rated power output:

(at THD+N = 0,1 %)

Distortion factor (THD+N):

Frequency response

Signal to noise ratio:

Power consumption at idle:

Loading and screening capacity:

Zero signal current setting:

Protection circuits:

Dimensions (H x W x D)

Weight:

9 Copyright, trademarks, warranty

This instruction manual was correct at the time of going to press. The manufacturer reserves the right to make

changes to the technical specification without prior notice as deemed necessary to uphold the ongoing process of

technical development.

This manual is done by ACCUSTIC ARTS Audio GmbH.

Trademarks:

ACCUSTIC ARTS

is a registered trademark of ACCUSTIC ARTS Audio GmbH.

1 x RCA (unbalanced)

1 x XLR (balanced)

RCA - 15 k

XLR - 16 k

2 loudspeaker terminals (WBT)

2 

30.0 dB

approx. 1,500 watts on 2 

approx. 1,350 watts on 4 

880 watts on 8 

approx.

(at each THD + N = 0,1% at 230VAC)

0,003% on 4  load at 1kHz and 10 watts

10 Hz – 50,000 Hz (+0/-0,5dB)

(at 10 watts on 4 )

-96 dB A (ref. 6.325 V)

appr. 120 watts

> 110,000 µF

300 mA

clipping, HF oscillations and too high DC offset

350 x 482 x 430 mm / 13.8 x 19 x 16.9 inches

approx. 60 kg / 132 lbs.