Cisco Catalyst 1800 Guide Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Перемикач Cisco Catalyst 1800 Guide. Cisco Catalyst 1800 Guide 8 сторінок. Token ring switch cable kit

Друкувати сторінку

Connecting to a Modem

Figure 2
Connecting to a Modem
Follow these steps to connect an IBM PC or compatible to a Catalyst 1800 switch (see Figure 3).
Note that the PC must be running a VT terminal emulation program.
Step 1
Step 2
Step 3
Step 4
Step 5
Transmit
Bits per character (BPC)
Parity
Stop bit
Flow control
After these parameters are set, you can access out-of-band management. Refer to the Catalyst 1800
Token Ring Switch User Guide for instructions on using the console interface.
4 Catalyst 1800 Token Ring Switch Cable Kit Guide
Connecting an IBM PC or Compatible to a Catalyst 1800 Switch
1
Ring Status
8 TOKEN RING
Port Activity
Pwr A
Sys Status
Pwr B
Failure
16 Mbps
1
Ring Status
4TR + FDDI
Port Activity
Pwr A
Sys Status
Pwr B
16 Mbps
Failure
DB-9 console
connector/port interface
RS-232 cable
Plug either end of the EIA/TIA-232 cable into the RJ-45-to-DB-9 female adapter labelled
"Console port."
Connect the console port female adapter to the male DB-9 console port on the front of the
Catalyst 1800 chassis.
Plug the RJ-45 connector at the other end of the EIA/TIA-232 cable into the
RJ-45-to-DB-25 male adapter labelled "Modem."
Connect the DB-25 male adapter to the appropriate female communications port on the
modem.
Turn on the modem and configure its VT emulation package with following parameters:
RJ-45 port
connectors
2
3
4
5
2
3
4
Status
Activity
Port status
LEDs
PC adapter
9600
8
None
1
Off
6
7
8
Bypass
Wrap
B
A
Catalyst 1800
PC or compatible