Cisco Catalyst 1900 Series Посібник із швидкого старту - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Cisco Catalyst 1900 Series. Cisco Catalyst 1900 Series 8 сторінок. Version 9.00.06
Також для Cisco Catalyst 1900 Series: Примітки до випуску (16 сторінок), Посібник (19 сторінок)
Друкувати сторінку
2
Cable the Switch
Note: Use a straight-through cable to
2
connect two ports when one of the ports is
designated with an X. Use a crossover cable
to connect two ports when both ports are
designated with an X.
Connect to Workstations,
Servers, and Routers
•
Connect a Category 3, 4, or 5
straight-through UTP cable to a
10BaseT port on the switch and to a
10BaseT port on the workstation,
server, or router.
•
Connect a Category 5 straight-through
UTP cable to a 100BaseTX port on the
switch and to a 100BaseTX port on the
workstation, server, or router.
10BaseT port
(RJ-45)
Category 5
straight-through cable
10BaseT port
(RJ-45)
SERIES
Connect to Switches and
Hubs
•
Connect a Category 3, 4, or 5 crossover
UTP cable to a 10BaseT port on the
switch and to a 10BaseT port on the
target switch or hub.
•
Connect a Category 5 crossover UTP
cable to a 100BaseTX port on the
switch and to a 100BaseTX port on the
target switch or hub.
•
Connect a 50/125- or 62.5/125-micron
multimode fiber-optic cable to the
100BaseFX port on the switch and to a
100BaseFX port on the workstation,
server, target switch, router, or hub.