Digiscan Labs iStranger Посібник користувача - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник користувача для Аксесуари для мобільних телефонів Digiscan Labs iStranger. Digiscan Labs iStranger 2 сторінки.
Друкувати сторінку
Device Modes
The voice changer has 2 modes, "Low" and "High". "Low" mode is indicated by a Red LED. "High" mode is indicated by a
Blue LED. By pressing the "Mode" button once the device will switch between Low and High, confirmed by the change in
LED color. You may change modes before or during use.
Using the Voice Changer
Before using the iStranger, be sure to read all the instructions and import notes to ensure that
optimal performance is obtained. It is also recommended that users practice with the device
utilizing both modes while trying different speech patterns, volumes and speeds to discover the
optimal voice changing experience.
Once the voice changer is fully charged and ready to use, plug the 3.5mm male connector into
your smart phone headset jack. The voice changer will automatically turn on and both of the
Mode LEDs will flash for approximately 2-3 seconds. After startup, the Red LED will remain lit
indicating that the voice changer is in "Low" mode and ready to use.
The voice changer will now function as the phone's headset. Using the phone to dial, place
the voice changer speaker, located at the top of the unit, to your ear and speak into its
microphone, located at the base. Again, you may change modes at anytime during use, if
desired.
Important notes:
1. For best results, speak clearly and concisely. Due to the nature of mobile phone connections, performance may
also be affected if you speak too quickly.
2. The quality of the voice heard by the recipient may be affected during first 5-10 seconds of the phone call. This is
due to adjustments made by the service provider and is a normal process associated with all mobile
communication to enhance voice clarity.
3. Due to the variance in the octave of the human voice, some people may not be able to use both "Low" and "High"
modes to reasonably mask their voice. Please make a few test calls to understand how the device will perform
with your specific voice.
4. To conserve battery life, the iStranger will go into a sleep mode when not in use. This will occur approximately 15
seconds after the headset jack is removed from the smart phone, the smart phone screen turns off, or upon
ending a phone call with the screen turned off. The iStranger will resume from sleep mode once the headset jack
is re-inserted or the phones screen is turned back on.
Included in the Package
1. Voice Changer "iStranger" – 1
2. Cable "USB to micro
USB" – 1
LOW VOICE HIGH
MODE
Earpiece
location
Microphone
location
3. Manual -1