DigiSender iMedia SmartSender Короткий посібник

Переглянути онлайн або завантажити pdf Короткий посібник для Аксесуари для телевізорів DigiSender iMedia SmartSender. DigiSender iMedia SmartSender 2 сторінки.

Друкувати сторінку
This Quick Guide has been designed for use with the most popular method of connecting the iMedia® SmartSender™. For other ways of connecting, please read the included Instruction Manual.
iMedia® SmartSender™
iMedia® Quick Guide
This Quick Guide has been designed for use with the most popular method of connecting the iMedia® SmartSender™. For other ways of connecting, please read the included Instruction Manual.
1
Verify the contents of the box
iMedia® SmartSender™
Included in the pack is:
• 1x DigiSender® iMedia® SmartSender™
1
Verify the contents of the box
Included in the pack is:
• 1x DigiSender® iMedia® Instruction Manual
• 1x DigiSender® iMedia® SmartSender™
• 1x DigiSender® iMedia® Instruction Manual
• 1x DigiSender® iMedia® Software Disc
• 1x DigiSender® iMedia® Software Disc
• 1x DigiSender® iMedia® Quick Guide
• 1x DigiSender® iMedia® Quick Guide
DC 5V
ETHERNET
POWER
DC 5V
ETHERNET IN
POWER
ETHERNET IN
DC 12V
4
AV OUT
Connect the power cable and press the power button
USB 1
USB 2
RESET
HDMI OUT
• Connect the power cable to the socket labelled DC 5V on the back of
the iMedia® SmartSender™.
ANT
• Plug the adaptor into an available mains socket.
• Press the power button on the back of the iMedia® SmartSender™.
ETHERNET IN
DC 12V
AV OUT
RESET
HDMI OUT
USB 1
USB 2
ANT
iMedia® SmartSender™
Power Cable
4
Connect the power cable and press the power button
• Connect the power cable to the socket labelled DC 12V on the back of
the iMedia® SmartSender™.
• Plug the adaptor into an available mains socket.
• Press the power button on the back of the iMedia® SmartSender™.
Ethernet Cable
HDMI Cable
Power Cable
Ethernet Cable
HDMI Cable
Power Cable
iMedia® Quick Guide
AutoPlay
• 1x 1m Ethernet Cable
2
3
Install the iMedia® software
Connect the Ethernet cable to your wireless router
• Place the iMedia® software disc into the disc tray of your PC or Laptop.
• Connect the Ethernet cable to the Ethernet socket on the back of the
• 1x 1m HDMI Cable
• In the AutoPlay menu, click 'Run AUTORUN.exe'.
iMedia® SmartSender™.
• 1x 1m Ethernet Cable
• Follow the on-screen instructions in the install wizard.
• Connect the other end of the Ethernet cable to an available Ethernet
• 1x 1m HDMI Cable
• After installation is complete, click Analysis on the Benchmark Tool.
socket on your wireless router.
• 1x 5V Power Cable
• 1x 5V Power Cable
Note: If the AutoPlay menu does not display, open My Computer and click on your
disc drive, then double click the AUTORUN.exe fi le to start the install wizard.
iMedia® Desktop Shortcut
HDMI OUT
USB 1
USB 2
AV OUT
ANT
iMedia® SmartSender™
Mains Socket
Power Cable
5
Confi gure the iMedia® SmartSender™ to connect to your wireless router via Wi-Fi
• Double click the iMedia® Shortcut on your PC or Laptop
tion Settings page.
desktop.
• Click the STA Mode tab.
• After a few seconds the iMedia® Utility Program will
• Check the tick box next to 'Enable Station Mode'.
sync with the iMedia® SmartSender™.
• Input your router SSID and Encryption type.
• Click the arrow at the bottom of the program.
• Input your router WEP/WPA/WPA2 KEY.
• Double click the Gear symbol to bring up the Confi gura-
• Click Save.
iMedia® Desktop Shortcut
Mains Socket
5
Configure the iMedia® SmartSender™ to connect to your wireless router via Wi-Fi
• Double click the iMedia® Shortcut on your PC or Laptop
desktop.
• After a few seconds the iMedia® Utility Program will
sync with the iMedia® SmartSender™.
• Click the arrow at the bottom of the program.
• Double click the Gear symbol to bring up the Configura-
AutoPlay
Model: DGIMST10
2
Install the iMedia® software
DC 5V
ETHERNET IN
R
HDMI OUT
DC 5V
ETHERNET IN
AV OUT
POWER
HDMI OUT
USB 1
USB 2
• Place the iMedia® software disc into the disc tray of your PC or Laptop.
ANT
iMedia® SmartSender™
Ethernet Cable
• In the AutoPlay menu, click 'Run AUTORUN.exe'.
• Follow the on-screen instructions in the install wizard.
• After installation is complete, click Analysis on the Benchmark Tool.
Note: If the AutoPlay menu does not display, open My Computer and click on your
disc drive, then double click the AUTORUN.exe file to start the install wizard.
The iMedia® SmartSender™ will then reboot itself and
automatically connect to your wireless router.
Note: Please consult your router documentation to fi nd your SSID
and WEP/WPA/WPA2 KEY. Alternatively, search online for how to
fi nd the SSID and WEP/WPA/WPA2 KEY for your specifi c router.
tion Settings page.
• Click the STA Mode tab.
• Check the tick box next to 'Enable Station Mode'.
• Input your router SSID and Encryption type.
• Input your router WEP/WPA/WPA2 KEY.
• Click Save.
RESET
Ethernet Cable
3
Connect the Ethernet cable to your wireless router
• Connect the Ethernet cable to the Ethernet socket on the back of the
iMedia® SmartSender™.
• Connect the other end of the Ethernet cable to an available Ethernet
socket on your wireless router.
The iMedia® SmartSender™ will then reboot itself and
automatically connect to your wireless router.
Note: Please consult your router documentation to find your SSID
and WEP/WPA/WPA2 KEY. Alternatively, search online for how to
find the SSID and WEP/WPA/WPA2 KEY for your specific router.
Model: DGIMST10
ETHERNET IN
DC 12V
USB 1
RESET
HDMI OUT
ETHERNET IN
DC 12V
AV OUT
HDMI OUT
USB 1
USB 2
ANT
iMedia® SmartSender™