FIBARO FGBHCD-001 Посібник з експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Аксесуари FIBARO FGBHCD-001. FIBARO FGBHCD-001 12 сторінок.

NOTE

The accessory mea-

sures temperature in

the place of installa-

tion. Remember that

temperature near the

ceiling may differ from

that on eye-level or

the floor..

FuNCTIONALITY

#6: Functionality

Carbon monoxide alarm:

The CO Sensor alarms about abnormal levels of carbon monoxide

concentration with 4 red blinks and 4 loud beeps (every 5 seconds).

Alarm is also reported to your iOS device.

Carbon monoxide measuring and storing:

The CO Sensor measures carbon monoxide concentration and re-

ports. If measured value differs from previously reported by at least

5ppm, accessory reports it to your iOS device.

Last 2500 measurements are stored in non-volatile memory of the ac-

cessory and can be accessed via FIBARO for HomeKit app.

Temperature measuring:

The CO Sensor measures ambient temperature every 30 seconds.

If the measured temperature differs from previously reported

by at least 0.5°C (0.9°F), accessory reports it to your iOS device.

Last 2500 measurements are stored in non-volatile memory of the ac-

cessory and can be accessed via FIBARO for HomeKit app.

Tamper detection:

The CO Sensor detects tampering when accessory is removed from

its base and reports it to your iOS device. Tampering is indicated with

one white blink and beep.

Battery level measuring:

The CO Sensor measures battery level every 6 hours and reports it to

your iOS device. Additionally, if battery level is below 15%, the acces-

sory will report low level battery status to your iOS device and indi-

cate it with one yellow blink and beep.