Digisol DG-GS1510HPEV2 Посібник з встановлення обладнання - Сторінка 9
Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Перемикач Digisol DG-GS1510HPEV2. Digisol DG-GS1510HPEV2 15 сторінок.
Друкувати сторінку
Connecting Console port
There is a console port on POE switch. This section explains the features and usage of
the port.
Speed: 115200bps, standard RJ 45 plug. Use dedicated cable to connect the port to PC
parallel port. Use terminal software (such as Windows super terminal) to configure and
monitor operations. Cable is provided with host. Terminal parallel communication
parameters can be set as: baud rate 115200bps, 8-bit data, 1 stop bit, no parity bit.
Console port uses RJ-45 connectors shown as follows. There are 8pin RJ-45
connectors.
POE switch console port and computer connection:
Console port pins are as follows:
Pin No.
1
2
3
4
5
6
7
8
-
Description
Carrier detect
Received data
Data set ready
Transmitted data
request to send
clear to send
Data terminal ready
signal ground
Hardware Installation Guide
Name
Note
CD
No connect
RXD
Input
DSR
No connect
TXD
Output
RTS
No connect
CTS
No connect
DTR
No connect
SG
GND
- 7