FIBARO FGDW-002-2 Посібник з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Датчики безпеки FIBARO FGDW-002-2. FIBARO FGDW-002-2 16 сторінок. Door/window sensor
Друкувати сторінку53. Temperature offset
The value to be added to the actual temperature, measured by the sen-
sor (temperature compensation).
Available settings: -1000–1000 (-100–100°C, 0.1°C step)
Default setting:
54. Temperature alarm reports
Temperature alarms reported to the Z-Wave controller. Thresholds are
set in parameters 55 and 56.
Available settings: 0 - temperature alarms disabled
Default setting:
55. High temperature alarm threshold
If temperature is higher than set value, overheat notification will be
sent and high temperature alarm will be triggered (if activated).
Available settings: 1-600 (0.1-60°C, 0.1°C step)
Default setting:
56. Low temperature alarm threshold
If temperature is lower than the set value, underheat notification will
be sent and low temperature alarm will be triggered (if activated).
Available settings: 0-599 (0-59.9°C, 0.1°C step)
Default setting:
0 (0°C )
Parameter size:
1 - high temperature alarm
2 - low temperature alarm
3 - high and low temperature alarms enabled
0
Parameter size:
350 (35°)
Parameter size:
100 (10°)
Parameter size:
2 [bytes]
1 [byte]
2 [bytes]
2 [bytes]
ADVAnCED PARAMETERS
13
i
NOTE
Value set in parame-
ter 55 must be higher
than value set in pa-
rameter 56.