Digisol DG-CD2030HD Посібник зі швидкого встановлення - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для ВІДЕОРЕЄСТРАТОР Digisol DG-CD2030HD. Digisol DG-CD2030HD 14 сторінок. 8 channel d1 mini digital video recorder

Друкувати сторінку

Following are the solutions to problems that may occur during the installation

and operation of the Digisol DG-CD2030HD.

1) The DVR cannot boot up normally.



The power supply is not correct.

Switch power supply line is not in good connection/damaged.



The program updation is wrong.



The hard disk is damaged or the hard disk lines are broken.



The front panel is damaged.



The main board of the DVR is damaged.



2) The DVR reboots automatically or stops working after boot up.

The input voltage is not stable or too low.



The hard disk is damaged or the hard disk lines are broken.



The power of the switch power supply is low.



Video signal is not stable.



Bad heat radiator or too much dust or bad running circumstance

for the DVR.

The hardware of the DVR is damaged.



3) System cannot detect the hard disk.

The hard disk power supply line is not connected.



The cables of the hard disk are damaged.



The hard disk is damaged.



The SATA port of main board is damaged.



This product comes with One Year warranty. For further details

about warranty policy and Product Registration, please visit

support section of www.digisol.com