Sharp Carousel R-1514 Додатковий посібник з обслуговування - Сторінка 18

Переглянути онлайн або завантажити pdf Додатковий посібник з обслуговування для Мікрохвильова піч Sharp Carousel R-1514. Sharp Carousel R-1514 33 сторінки. Over the range stainless
Також для Sharp Carousel R-1514: Брошура та технічні характеристики (8 сторінок), Інструкція з монтажу Посібник з монтажу (40 сторінок), Посібник з приготування (32 сторінок), Брошура та технічні характеристики (5 сторінок), Інструкція з монтажу Посібник з монтажу (9 сторінок), Технічні характеристики (2 сторінок), Посібник з приготування (32 сторінок), Посібник (40 сторінок), Додатковий посібник з обслуговування (33 сторінок)

Друкувати сторінку
Sharp Carousel R-1514 Додатковий посібник з обслуговування
R-1514
Pin No.
Signal
I/O
34
P26
OUT
35
P25
OUT
36
P24
OUT
37
P23
OUT
38
P22
OUT
39
P21
OUT
40
P20
OUT
41
P17
OUT
42
P16
OUT
43
P15
OUT
44
P14
OUT
45-47
P13-P11
OUT
48-72
SEG24-SEG0
OUT
73/74
VCC/VREF
IN
75
AVSS
IN
76
COM3
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G7 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G6 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G5 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G4 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G3 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G2 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G1 line keys on key matrix is touched.
Hood lamp driving signal.
To turn on and off relay(RY6). "L" level: During
Hood lamp ON. "H" level: During Hood lamp OFF.
Hood lamp driving signal.
To turn on and off relay(RY5). "L" level: During
Hood lamp ON. "H" level: During Hood lamp OFF.
Hood motor high / low driving signal.
To turn on and off relay(RY3). "L" level: During Hood
motor high. "H" level: During Hood motor low.
Hood motor driving signal.
To turn on and off relay(RY4). "L" level: During
Hood motor ON. "H" level: During Hood motor OFF.
Terminal not used.
Segment data signal.
Connected to LCD.
The relation between signals are as follows:
LSI signal (Pin No.)
LCD (Pin No.)
SEG 24 (48) ---------------- SEG24 (29)
SEG 23 (49) ---------------- SEG23 (28)
SEG 22 (50) ---------------- SEG22 (27)
SEG 21 (51) ---------------- SEG21 (26)
SEG 20 (52) ---------------- SEG20 (25)
SEG 19 (53) ---------------- SEG19 (24)
SEG 18 (54) ---------------- SEG18 (23)
SEG 17 (55) ---------------- SEG17 (22)
SEG 16 (56) ---------------- SEG16 (21)
SEG 15 (57) ---------------- SEG15 (20)
SEG 14 (58) ---------------- SEG14 (19)
SEG 13 (59) ---------------- SEG13 (18)
SEG 12 (60) ---------------- SEG12 (17)
Connected to GND.
Connected to VC.
Common data signal.
16
Description
ON
ON
ON
ON
LSI signal (Pin No.)
SEG 11 (61) ------------------ SEG11 (16)
SEG 10 (62) ------------------ SEG10 (15)
SEG 9 (63) ------------------ SEG 9 (14)
SEG 8 (64) ------------------ SEG 8 (13)
SEG 7 (65) ------------------ SEG 7 (12)
SEG 6 (66) ------------------ SEG 6 (11)
SEG 5 (67) ------------------ SEG 5 (10)
SEG 4 (68) ------------------ SEG 4 ( 9)
SEG 3 (69) ------------------ SEG 3 ( 8)
SEG 2 (70) ------------------ SEG 2 ( 7)
SEG 1 (71) ------------------ SEG 1 ( 6)
SEG 0 (72) ------------------ SEG 0 ( 5)
Connected to LCD signal COM4.
H : GND
OFF
L
H : GND
OFF
L
H : GND
OFF
L
H : GND
OFF
L
LCD (Pin No.)