Crestron UC-MX50-Z-UPGRD Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Конференц-система Crestron UC-MX50-Z-UPGRD. Crestron UC-MX50-Z-UPGRD 9 сторінок. Flex advanced medium room upgrade solution with zoom rooms software
Також для Crestron UC-MX50-Z-UPGRD: Посібник із швидкого старту (8 сторінок)

Друкувати сторінку
Crestron UC-MX50-Z-UPGRD Посібник із швидкого старту
UC-MX50-Z-UPGRD
Crestron Flex Advanced Medium Room Upgrade Solution with Zoom Rooms® Software
The UC-MX50-Z-UPGRD solution provides all of the necessary
components to upgrade a deployed Crestron Flex tabletop conference
device and camera to a complete video conference system for use with
Zoom Rooms® software. It supports up to three video displays and
features a UC bracket assembly, cables, and power supplies.
Minimum Requirements:
A Crestron Flex tabletop conference device and camera solution
l
(CCS-UC-1-X KIT).
A video display (not included) connected to the UC Engine. A second
l
display is optional.
A Zoom Rooms account or activation code (not included).
l
In the Box
UC Bracket Assembly
1
UC Bracket Assembly with UC Engine and HDMI® or AV
over CAT5 content ingest (UC-BRKT-260-P-Z-ASSY,
6512692)
2
Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (9.5 mm x
12.7 mm) (2052565)
1
Key, Anchor (4529654)
1
Power pack (2045870)
2
Screw, 8-AB x 1-1/2 in. (38.1 mm), Pan Head, Combo
(2052567)
4
Tie Wrap (2047935)
Additional Items
1
Camera wall mount kit (6510998)
1
Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
1
Cable, DisplayPort™ to HDMI, 6 ft (1.8 m) (6508282)
Configure the Conference Device
Prior to making system connections, deployed conference devices must
be configured to operate as part of a complete Zoom Rooms system.
Some deployed conference devices may be operating in Crestron
Default mode.
To configure the conference device to operate in Zoom Rooms Video
mode:
1. On a computer, enter the IP address displayed on the conference
device into a web browser.
NOTES:
The device and computer must be on the same network switch
l
and VLAN.
A login with administrative rights for the device is required.
l
2. Log in to the device and navigate to DEVICE > Applications.
3. From the Application Mode drop down menu, select Zoom Rooms
Video.
4. Select Save Changes. The conference device will reboot in Zoom
Rooms Video mode and log out all users.
For system configuration, refer to Configure.
Quick Start
1