Sharp Aquos LC 20S4U Посібник з експлуатації - Сторінка 25
Переглянути онлайн або завантажити pdf Посібник з експлуатації для РК-ТЕЛЕВІЗОР Sharp Aquos LC 20S4U. Sharp Aquos LC 20S4U 45 сторінок. Sharp operation manual liquid crystal television lc-20s4u
Також для Sharp Aquos LC 20S4U: Посібник з експлуатації (43 сторінок)
Useful Features
• EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedures.
CD
Press £/'Y to select "CH-SETTING" in the SETUP screen (see
page 20) and press ENTER.
®
Press £/'Y to select "EZ SETUP", and press ENTER.
@)
Press £/'Y to select "YES", and press ENTER.
Refer to page 14 for more information on EZ SETUP.
• Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
~STEREO
SAP
MONO
2
Repeat steps 1 to 3 of Setting the AIR/CABLE .
Press ENTER. The tuner will search through all available
channels in your area and add them to the TV memory.
~
• To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels .
• Saving broadcast TV channels in the memory
•••
§) • •
0 0 0
MENUI.I).
RETURN
o
0
MUTE
ONLY
CC
INPUT
0 0 0 0
o
~
SLEEP
Press MENU to display the Menu screen.
. Press
<llIIII/~
to select "SETUP".
Press .Ii..(tr to select "CH-SETIING", and press ENTER.
Press .Ii../.., to select "AIR/CABLE", and press ENTER.
Press .Ii../T to select desired setting, and press ENTER.
Press MENU to exit.
~
• Receivable channels of your LCD TV set are:
AIR channels:
CABLE channels:
VHF: 2 through 13.
1 (HRC and IRC)
UHF: 14 through 69.
2 through 125 (STD, HRC and IRC)
• Adding weak or additional channels or erasing
unwanted channels from TV memory
Individual settings of programs can be adjusted.
Repeat steps 1 to 3 of Setting the AIR/CABLE.
Press .Ii../T to select "CH MEMORY", and press
ENTER.
Press .Ii../T to move the cursor to "CHANNEL", and use
<llIIII/~
or Channel Select to select each desired channel
to add or erase.
Press .Ii../T to move the cursor to "SKIP", and use
<llIIII/~
to select "ON" or "OFF".
Press MENU to exit.
~
• If CH SEARCH is performed again, the previously memorized
channels will be lost.
24
@