Sharp Aquos LC 32HT3U Посібник з експлуатації - Сторінка 21

Переглянути онлайн або завантажити pdf Посібник з експлуатації для РК-ТЕЛЕВІЗОР Sharp Aquos LC 32HT3U. Sharp Aquos LC 32HT3U 29 сторінок. Sharp lc-32ht3u/lc-37ht3u/lc-42ht3u aquos operation manual

Друкувати сторінку

Appendix

Removing the stand

Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.

CAUTION

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

Before attaching/detaching stand

• Before performing work make sure to turn off the TV.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

Hex key

Unfasten the four screws used to secure the stand in

place.

NOTE

• To attach the stand, perform the above steps in reverse order.

Setting the TV on the wall

CAUTION

• The model AN-52AG1 of the wall mount bracket can be used only with LC-42HT3U.

• This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use

of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the TV requires special skill that should only be performed by qualiﬁ ed service personnel. Customers should not attempt to

do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

• You can ask a qualiﬁ ed service professional about using an optional AN-37AG2/AN-52AG1 bracket to mount the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2/AN-52AG1 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting

Angular mounting

NOTE

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

• Due to the terminal conﬁ guration on this TV, when you wall-mount this model, make sure there is enough space between the

wall and the TV for the cables.

Detach the stand from the TV. (Hold the stand so it

will not drop from the edge of the base area.)

About setting the TV angle and height adjustment

AN-37AG2

AN-52AG1

AN-37AG2

Model

Angle of TV

LC-32HT3U

0/5/10°

LC-37HT3U/

0/5°

LC-42HT3U

AN-52AG1 (LC-42HT3U only)

1 0/5/10/15/20°

2 f1

(f5)/0/

(e5)

• can be moved 1

(5) up or down

Unit: inch (cm)