Sharp Aquos LC 42SB45U Посібник з експлуатації - Сторінка 21
Переглянути онлайн або завантажити pdf Посібник з експлуатації для РК-ТЕЛЕВІЗОР Sharp Aquos LC 42SB45U. Sharp Aquos LC 42SB45U 46 сторінок. Sharp liquid crystal television operation manual
Друкувати сторінку
Direct Button Operation
Changing Channels
You can change channels by pressing
CH
or 0-9, or • (DOT).
+/-
Examples:
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5
ENT.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1
1
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2
2
ENT.
•
When selecting a 1-digit channel
number, it is not necessary to press 0
before the number.
Changing Volume
You can change the volume by pressing
VOL k / l on the TV or on the remote
control unit.
•
To increase the volume, press
VOL k .
•
To decrease the volume, press
VOL l .
INPUT
To view external source images, select the
input source using INPUT on the remote
control unit or INPUT on the TV.
1.
Press
INPUT.
•
A list of selectable sources
appears.
2.
Press
INPUT again to select the input
source.
5
ENT.
• (DOT)
1
•
An image from the selected source
automatically displays.
•
Each time
INPUT is pressed, the
input source toggles.
•
a / b to select the
If you press
input source, press Enter to
confirm your selection.
•
See page 17-18 for external equipment
connection.
MUTE
Mutes the current sound output.
Press MUTE.
•
Mute can be canceled by using the
method below.
-
Mute will be canceled if you press
VOL+/- or MUTE.
SLEEP
Allows you to set a time when the TV
automatically switches to standby.
Press SLEEP.
•
The remaining time displays when
the sleep timer has been set.
•
Each time you press
remaining time switches as shown
below.
Off, 10, 20, 30, 40, 50, 60, 90, 120
•
When set, the time automatically
starts counting down.
•
If you want to adjust the sleep
timer, you can press SLEEP twice
then change the time setting.
•
One minute before the time
expires, the remaining time
displays every second.
•
Select
"Off" by pressing SLEEP to
cancel the sleep timer.
•
The TV will enter standby mode (power
indicator lights red) when the remaining
time reaches zero.
SLEEP, the
21