Sharp Aquos LC-26AD5S Посібник з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації для РК-ТЕЛЕВІЗОР Sharp Aquos LC-26AD5S. Sharp Aquos LC-26AD5S 39 сторінок. Lcd colour television
Також для Sharp Aquos LC-26AD5S: Посібник з експлуатації (39 сторінок)
Друкувати сторінку
Quick guide
Attaching the stand (LC-26AD5E, LC-26AD5S, LC-32AD5E, LC-32AD5S)
Before performing work spread cushioning over the base area to lay the TV on, making sure the area is
completely flat. This will prevent it from being damaged.
Before attaching (or detaching) stand, unplug the AC cord from the AC INPUT terminal.
Confirm the 8 screws supplied with the TV.
Short screws (
4)
X
(used in step 2)
2
Remove the covering sheet before use.
Set the post for the stand unit onto the box.
Attach the base to the post.
2
Attach the base to the 4 screws into the 4 holes on
3
the bottom of the base.
Hex key
Screw
Setting the TV
Removing the covering sheet
For protection, sheets ,
( : LC-20AD5E, LC-20AD5S Black models only / ,
Remove each sheet.
Long screws (
4)
X
(used in step 3)
and
are covering the product. Please remove these sheets before use.
Tear from the cut point and
remove the sheet by peeling it
back to either side.
3
Insert the stand into the openings on the bottom of
the TV.
Insert and tighten the 4 screws into the 4 holes on
2
the rear of the TV.
NOTE
• To detach the stand, perform the step in reverse order.
: Black models only)
Hex key
Screw
Soft cushion
There is a protective film
covering the face of the
remote control. Please
remove this film before
use.
-3
GB